show flash
To view the flash contents, use the show flash command.
show flash [{cores [detail core-file-name ]|crash |syslogs}]
Syntax Description
Displays the core files in flashcores
Displays the core file contentsdetail
The core file name
core-file-name
Displays the crash files in flashcrash
Displays the syslogs files in flashsyslogs
Command Modes
User EXEC (>)
Privileged EXEC (#)
Command History
ModificationRelease
This command was
introduced.
8.1.111.0
The following example shows how to view the details of a core file in flash:
cisco-wave2-ap# show flash cores detail filename1
Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7
109
show Commands
show flash
To Next Page
Loading...
