show capwap
To disaply CAPWAP options, use the show capwap command.
show capwap [{ip |mcast |traffic}]
Syntax Description
CAPWAP client informationclient
CAPWAP ID informationids
CAPWAP IP configurationip
CAPWAP location informationlocation
CAPWAP multicast informationmcast
PNP informationpnp
CAPWAP traffic informationtraffic
Command Modes
User EXEC (>)
Privileged EXEC (#)
Command History
ModificationRelease
This command was
introduced.
8.1.111.0
The following example shows how to view the CAPWAP multicast information:
cisco-wave2-ap# show capwap mcast
Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7
90
show Commands
show capwap
To Next Page
Loading...
