Cisco Aironet Wave 2 User Manual

debug capwap client avc
To enable debugging of CAPWAP client AVC, use the debug capwap client avc command.
debug capwap client avc {all | detail | error | event | info | netflow {all | detail | error
| event | packet} | numflows}
Syntax Description
Enables debugging of all CAPWAP client AVCall
Enables debugging of CAPWAP AVC detaildetail
Enables debugging of CAPWAP AVC errorerror
Enables debugging of CAPWAP AVC eventevent
Enables debugging of CAPWAP AVC informationinfo
Enables debugging of CAPWAP client AVC NetFlownetflow
Enables debugging of all CAPWAP client AVC NetFlownetflow all
Enables debugging of CAPWAP client AVC NetFlow detailnetflow detail
Enables debugging of CAPWAP client AVC NetFlow errornetflow error
Enables debugging of CAPWAP client AVC NetFlow eventnetflow event
Enables debugging of CAPWAP client AVC NetFlow packetnetflow packet
Enables debugging of CAPWAP client AVC numflowsnumflows
Command Modes
Privileged EXEC (#)
Command History
ModificationRelease
This command was
introduced.
8.1.111.0
Examples
The following example shows how to enable debugging of all CAPWAP client AVC:
cisco-wave2-ap# debug capwap client avc all
Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7
48
debug Commands
debug capwap client avc

Cisco Aironet Wave 2 Specifications

General

Brand	Cisco
Model	Aironet Wave 2
Category	Wireless Access Point
Language	English