Cisco Aironet Wave 2 - Clear Dot11

clear dot11
To clear the 802.11 configuration, use the clear dot11 command.
clear dot11 sensor
Syntax Description
Clears the sensor configuration and rebootssensor
Command Modes
Privileged EXEC (#)
Command History
ModificationRelease
This command was
introduced.
8.1.111.0
This example shows you how to clear the 802.11 configuration:
cisco-wave2-ap# clear dot11 sensor
Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7
24
clear Commands
clear dot11