Cisco Aironet Wave 2 - clear counters

clear counters
To clear 802.11 radio statistics, use the clear counters command.
clear counters [Dot11Radio interface-number}]
Syntax Description
(Optional) Clear Dot11 interface statisticsDot11Radio
Dot11Radio interface number; valid value is 0 or
1
interface-number
Command Modes
Privileged EXEC (#)
Command History
ModificationRelease
This command was
introduced.
8.1.111.0
Examples
The following example shows how to clear 802.11 interface statistics for the interface number
specified:
cisco-wave2-ap# clear counters Dot11Radio 1
Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7
21
clear Commands
clear counters