Cisco Aironet Wave 2 User Manual

show trace
To view trace logs on the AP, use the show trace command.
show trace
Command Modes
Privileged EXEC (#)
Command History
ModificationRelease
This command was
introduced.
8.1.111.0
The following example shows how to view the trace logs on the AP:
cisco-wave2-ap# show trace
Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7
138
show Commands
show trace

Cisco Aironet Wave 2 Specifications

General

Brand	Cisco
Model	Aironet Wave 2
Category	Wireless Access Point
Language	English