Cisco Aironet Wave 2 User Manual

undebug
To disable debugging on the access point, use the undebug command.
undebug [all]
Syntax Description
Disables all debugging messages.all
Command Modes
Privileged EXEC (#)
Command History
ModificationRelease
This command was
introduced.
8.1.111.0
Examples
The following example shows how to disable all debugging messages:
cisco-wave2-ap# undebug all
Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7
79
debug Commands
undebug

Cisco Aironet Wave 2 Specifications

General

Brand	Cisco
Model	Aironet Wave 2
Category	Wireless Access Point
Language	English