Cisco Aironet Wave 2 User Manual

show security system state
To view the current state of system-level security, use the show security system state command.
show security system state
Syntax Description
This command has no arguments or keywords.
Command Modes
Privileged EXEC (#)
Command History
ModificationRelease
This command was
introduced.
8.7
Examples
To view the current state of system-level security, use this command:
cisco-wave2-ap# show security system state
XSPACE:
Non-Executable stack: Yes
Non-Executable heap: Yes
Non-Writable text: Yes
OSC:
Version: 1.1.0
SafeC:
Version: 3.1.1
The table below describes the significant fields shown in the display:
Table 4: show security system state Field Descriptions
DescriptionField
Indicates whether the system prevents execution from
the stack
Non-Executable stack
Indicates whether the system prevents execution from
the heap
Non-Executable heap
Indicates whether the system prevents the text section
from being writable
Non-Writable text
Indicates the version of the OSC library used by the
applications
OSC version
Indicates the version of the SafeC library used by the
applications
SafeC version
Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7
133
show Commands
show security system state

Cisco Aironet Wave 2 Specifications

General

Brand	Cisco
Model	Aironet Wave 2
Category	Wireless Access Point
Language	English