Cisco Aironet Wave 2 - debug arp

debug arp
To enable debugging of ARP, use the debug arp command.
debug arp {errors | events | packets}
Syntax Description
Enable debugging of ARP errorserrors
Enable debugging of ARP eventsevents
Enable debugging of ARP Tx and Rx packetspackets
Command Modes
Privileged EXEC (#)
Command History
ModificationRelease
This command was
introduced.
8.1.111.0
Examples
The following example shows how to enable debugging of ARP errors:
cisco-wave2-ap# debug arp errors
Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7
45
debug Commands
debug arp