Cisco Aironet Wave 2 User Manual

exec-timeout
To set the exec-timeout, use the exec-timeout command.
exec-timeout timeout-value
Syntax Description
Timeout value; valid values range between 0 to 2147483647
timeout-value
Command Modes
Privileged EXEC (#)
Command History
ModificationRelease
This command was
introduced.
8.1.111.0
Examples
The following example shows how to set the exec-timeout to 20 seconds:
cisco-wave2-ap# exec-timeout 20
Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7
148
System Management Commands
exec-timeout

Cisco Aironet Wave 2 Specifications

General

Brand	Cisco
Model	Aironet Wave 2
Category	Wireless Access Point
Language	English