Cisco Aironet Wave 2 - show ap client-trace status

show ap client-trace status
To view the AP client trace details, use the show ap client-trace status command.
show ap client-trace { events { all | mac word | system } | skb { drop-list | stats } | status }
Syntax Description
View client trace event informationevents
Displays all client trace eventsall
Displays all system eventssystem
Displays client trace events for specific MAC addressmac
Specific client MAC address
word
Displays client trace SKB informationskb
Displays client trace SKB drop list informationdrop-list
Displays client trace SKB statisticsstats
Displays client trace configurationstatus
Command Modes
Privileged EXEC (#)
Command History
ModificationRelease
This command was
introduced.
8.1.111.0
The following example shows how to view the AP client trace status:
cisco-wave2-ap# show ap client-trace status
Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7
83
show Commands
show ap client-trace status