Cisco Aironet Wave 2 User Manual

config ap client-trace output
To configure the trace output, use the config ap client-trace output command.
config ap client-trace output console-log {disable | enable}
Syntax Description
Displays trace output to console and logconsole-log
Disables trace output to console and logdisable
Enables trace output to console and logenable
Command Modes
Privileged EXEC (#)
Command History
ModificationRelease
This command was
introduced.
8.1.111.0
The following example shows you how to configure the trace output:
cisco-wave2-ap# config ap client-trace output
Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7
31
config Commands
config ap client-trace output

Cisco Aironet Wave 2 Specifications

General

Brand	Cisco
Model	Aironet Wave 2
Category	Wireless Access Point
Language	English