Cisco Aironet Wave 2 User Manual

Understanding no Forms of Commands
While you need to use the debug command to enable debugs on many features, the prefix no disables debugs
on those respective features. For example:
Command to enable debug:
cisco-wave2-ap# debug client ...
Command to disable debug:
cisco-wave2-ap# no debug client ...
Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7
4
Using the Command Line Interface
Understanding no Forms of Commands

Cisco Aironet Wave 2 Specifications

General

Brand	Cisco
Model	Aironet Wave 2
Category	Wireless Access Point
Language	English