Cisco Aironet Wave 2 - show dot11 qos

show dot11 qos
To view the Quality of Service (QoS) parameters for 802.11 network, use the show dot11 qos command.
show dot11 qos
Command Modes
Privileged EXEC (#)
Command History
ModificationRelease
This command was
introduced.
8.1.111.0
The following example shows how to view the Quality of Service (QoS) parameters for 802.11
network:
cisco-wave2-ap# show dot11 qos
Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7
107
show Commands
show dot11 qos