debug memory
To debug memory, use the debug memory command.
debug memory {clear | save}
Syntax Description
Removes memory debug upon boot-upclear
Saves current debug level and applies it upon following bootssave
Command Modes
Privileged EXEC (#)
Command History
ModificationRelease
This command was
introduced.
8.1.111.0
Examples
The following example shows how to remove memory debug upon boot-up:
cisco-wave2-ap# debug memory clear
Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7
61
debug Commands
debug memory
To Next Page
Loading...
