Cisco Aironet Wave 2 - Traceroute

traceroute
To view the routes followed by packets traveling in the network, use the traceroute command.
traceroute destination-address
Syntax Description
IP address of the destination of the packets
destination-address
Command Modes
Privileged EXEC (#)
Command History
ModificationRelease
This command was
introduced.
8.1.111.0
Examples
The following example shows how to view the routes followed by packets traveling in the network,
with a destination IP address specified:
cisco-wave2-ap# traceroute 209.165.200.224
Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7
78
debug Commands
traceroute