Cisco Aironet Wave 2 User Manual

config cts debug enforcement rate
To configure the rate of printing of debug logs, use the config cts debug enforcement rate command.
config cts debug enforcement rate {X Y }
Command Modes
Privileged EXEC (#)
Syntax Description
Configure the rate of printing debug logsrate
Number of packets whose debugs are to be displayed for every Y number of packets processed; valid
range is between 0 to 10000
X
Number of packets to be processed; valid range is between 0 to 10000
Y
Command History
ModificationRelease
This command was
introduced.
8.1.111.0
Examples
The following example shows how to configure the rate of printing of debug logs such that debugs
of 100 packets are displayed for every 500 packets processed:
cisco-wave2-ap# config cts debug enforcement rate 100 500
Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7
39
config Commands
config cts debug enforcement rate

Cisco Aironet Wave 2 Specifications

General

Brand	Cisco
Model	Aironet Wave 2
Category	Wireless Access Point
Language	English