Cisco Aironet Wave 2 - Debug Memory Pool

debug memory pool
To debug memory pool, use the debug memory pool command.
debug memory pool {diff | realtime interval 1-1000000-seconds | start}
Syntax Description
Shows memory pool debug difference in detaildiff
Configures realtime interval for the memory pool
realtime interval 1-1000000-seconds
Starts the debug for the memory poolstart
Command Modes
Privileged EXEC (#)
Command History
ModificationRelease
This command was
introduced.
8.1.111.0
Examples
The following example shows how to configure realtime interval of 180 seconds for the memory
pool:
cisco-wave2-ap# debug memory pool realtime interval 180
Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7
62
debug Commands
debug memory pool