Cisco Aironet Wave 2 User Manual

debug traffic
To enable traffic debugging, use the debug traffic command.
debug traffic {host {icmpv6 | ip | ipv6 | tcp | udp { verbose}} | wired {ip | tcp | udp
{verbose}}}
Syntax Description
Enabling host traffic debugginghost
Enabling wired traffic debuggingwired
Display verbose outputverbose
Enabling host ICMPv6 traffic dumpicmpv6
Enabling host IP traffic dumpip
Enabling host IPv6 traffic dumpipv6
Enabling TCP traffic dumptcp
Enabling UDP traffic dumpudp
Command Modes
Privileged EXEC (#)
Command History
ModificationRelease
This command was
introduced.
8.1.111.0
Examples
The following example shows how to enable debugging of host IP traffic dump:
cisco-wave2-ap# debug traffic host ip
Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7
74
debug Commands
debug traffic

Cisco Aironet Wave 2 Specifications

General

Brand	Cisco
Model	Aironet Wave 2
Category	Wireless Access Point
Language	English