Cisco Aironet Wave 2 - show avc nbar

show avc nbar
To view the AVC NBAR information, use the show avc nbar command.
show avc nbar {statistics |build |version}
Syntax Description
Displays NBAR build detailsstatistics
Displays NBAR statisticsbuild
Displays NBAR and PP versionversion
Command Modes
User EXEC (>)
Privileged EXEC (#)
Command History
ModificationRelease
This command was
introduced.
8.1.111.0
The following example shows how to view the AVC NBAR build information:
cisco-wave2-ap# show avc nbar build
Cisco Aironet Wave 2 Access Point Command Reference, Release 8.7
86
show Commands
show avc nbar