33
DLITE
Patching
To patch scrollers
Example: Patch scrollers for channel fixtures 4 through 8 to DMX addresses 104 through 108.
1 Select channels 4 through 8.
2 Press
DIM.
3 Tap
SCROLLER.
4 Enter the first DMX address, in this example the first DMX address is 104.
5 Press
ENTER.
Or
Tap
SET.
The scroller patch is stored.
To patch more than 1 DMX address to a channel (soft patching)
Example: Patch Port 2, DMX addresses 12 - 24 to channel 1.
1 Select channel 1.
2 Press
DIM.
The touch screen is in
DMX Address mode.
3 Select the DMX addresses on the keypad:
2/12 2/24.
4 Press
ENTER or STORE.
5 Press
RESET to exit the DMX port display.
To clear patching
Example: Clear the patch assignment for channel 5 which is patched to port 1, DMX offset 5.
1 Press
DIM.
The touch screen is in
DMX Address mode.
2 Select dimmer 5.
3 Press
DELETE.
Confirmation is requested.
4 Press
DELETE or ENTER or tap OK.
The DMX address is cleared. Now a new DMX offset can be set for channel 5.
5 Press
RESET to exit the DMX port display.
OR
1 Press
DIM.
2 Select dimmer 5.
3 Tap
CLEAR.
You are prompted to confirm the delete command.
4 Press
DELETE or ENTER or tap OK.
The DMX address is cleared. Now a new DMX offset can be set for channel 5.
To Next Page
Loading...