Develop ineo 350 - Page 171

9. Utility/Counter Mode Field Service Ver. 1.0 Aug. 2005
132
bizhub 200/250/350
Adjustment / Setting
D. SMTP Settings
(1) SMTP Server Address
(2) E-Mail Address
(3) SMTP Authentication User Name
(4) SMTP Authentication Password
E. POP3 Settings
(1) POP3 Server Address
(2) POP3 User Name
Functions • To set the SMTP server address.
Use
• To set the SMTP server address required for performing Scan to E-Mail and Internet
Fax.
Setting/
Procedure
• IP address Version 4 format
[0 to 255] . [0 to 255] . [0 to 255] . [0 to 255]
Functions • To set the e-mail address of the machine.
Use • To enter the e-mail address of the machine.
Setting/
Procedure
1. Touch the [E-Mail Address].
2. Enter the e-Mail address of the local machine from the 10-Key Pad or the keyboard on
the screen and then touch [Enter].
Functions • To set the user name for SMTP authentication.
Use
• To enter the user name when the mail transfer authentication (SMTP authentication)
function is used.
Setting/
Procedure
1. Touch the [SMTP Authentication User Name].
2. Enter the SMTP Authentication User Name of the local machine from the 10-Key Pad
or the keyboard on the screen and then touch [Enter].
Functions • To set the password for SMTP authentication.
Use
• To enter the password when the mail transfer authentication (SMTP authentication)
function is used.
Setting/
Procedure
1. Touch the [SMTP Authentication Password].
2. Touch [New Password], enter the password, and then touch [Enter].
3. Touch [Confirm New Password], enter the password once again, and then touch
[Enter].
Functions • To set the POP3 server address.
Use • To enter the POP3 server address required for receiving Internet Fax.
Setting/
Procedure
• IP address Version 4 format
[0 to 255] . [0 to 255] . [0 to 255] . [0 to 255]
Functions • To set the POP3 server user name.
Use • To enter the POP3 server user name required for receiving Internet Fax.
Setting/
Procedure
1. Touch the [POP3 User Name].
2. Enter the POP3 User Name of the local machine from the 10-Key Pad or the keyboard
on the screen and then touch [Enter].