Develop ineo 350 - Page 172

Field Service Ver. 1.0 Aug. 2005 9. Utility/Counter Mode
133
bizhub 200/250/350Adjustment / Setting
(3) POP3 Password
(4) Auto-RX Check
F. Mail/Scan Settings
(1) E-Mail Mode
<TX Size (Max.)>
<TX Quality (Max.)>
<Coding Method>
(2) Scan Mode
<File Type>
Functions • To set the POP3 password.
Use • To enter the POP3 password.
Setting/
Procedure
1. Touch the [POP3 Password].
2. Touch [New Password], enter the password, and then touch [Enter].
3. Touch [Confirm New Password], enter the password once again, and then touch
[Enter].
Functions • To set intervals, at which a check is made by connecting to the POP3 server.
Use • To change the intervals, at which a check is made by connecting to the POP3 server.
Setting/
Procedure
• The default setting is “Check OFF”.
• Setting range: 1 to 99 M
1. Touch the [Auto-RX Check].
2. Enter the value from the 10-Key Pad and touch [Enter].
3. Select [Check OFF] to select not to make the auto check.
Functions • To set the upper limit of the size of the document to be sent.
Use • To set the default upper limit of the size of the document for Internet Fax.
Setting/
Procedure
• The default setting is “11x17”.
Letter/Legal “11x17”
Functions • To set the upper limit of the image quality to be sent.
Use • To set the upper limit of the image quality to be sent.
Setting/
Procedure
• The default setting is “600 dpi”.
200 dpi 400 dpi “600 dpi”
Functions • To set the coding method for the data to be sent.
Use • To set the coding method for the data to be sent.
Setting/
Procedure
• The default setting is “MH”.
“MH” MR MMR
Functions • To set the file type of the data to be sent.
Use • To set the file type of the data to be sent.
Setting/
Procedure
• The default setting is “TIFF”.
“TIFF” PDF