9. Utility/Counter Mode Field Service Ver. 1.0 Aug. 2005
134
bizhub 200/250/350
Adjustment / Setting
<Coding Method>
G. Scanner Settings
(1) Activity Report
(2) RX Doc. Header Print
(3) E-Mail Header Text
(4) Gateway TX
(5) Subject Registration
Functions • To set the coding method for the selected file type.
Use • To set the coding method for the selected file type.
Setting/
Procedure
• The default setting is “MH”.
“MH” MMR
Functions • To set whether or not to give an activity report.
Use • To set whether or not to return an activity report to the sending end of e-mail.
Setting/
Procedure
• The default setting is “ON”.
“ON” OFF
Functions • To set whether or not to print header in a received document.
Use
• To set whether or not to print the e-mail header on the first page of a received docu-
ment.
Setting/
Procedure
• The default setting is “OFF”.
ON “OFF”
Functions • To set whether or not to insert text in a transmitted document.
Use • To set the insertion method of text to be inserted in the transmitted document.
Setting/
Procedure
• The default setting is “Fixed Text”.
“Fixed Text” Custom Text OFF
Functions
• To set whether to enable or disable transmission of e-mail during fax transfer in gate-
way communications.
Use
Setting/
Procedure
• The default setting is “Restrict”.
Allow “Restrict”
Functions • To set the subject during transmission.
Use • To enter the subject during transmission.
Setting/
Procedure
• The maximum number of characters to be registered is 40 en-size (20 em-size) charac-
ters.
To Next Page