Field Service Ver. 1.0 Aug. 2005 11. Tech. Rep. Mode
159
bizhub 200/250/350Adjustment / Setting
11.5 Settings in the System Input
11.5.1 LCT Paper Size
11.5.2 Change Fixed Zoom
11.5.3 Machine Configuration
11.5.4 Technical Memo
11.5.5 Hard Disk
Functions
• To enter the paper size when the LCT is installed.
• The function can be set only when the LCT is mounted on the machine.
Use
Setting/
Procedure
• The default setting is “Letter”.
<For U.S.>
A4 “Letter”
<For Europe and Others>
“A4” Letter
Functions
• To change the fixed zoom ratio.
Use
Adjustment
Range
• x0.250 to x4.000 (common to all zoom keys)
Setting/
Procedure
1. Call the Tech. Rep. Mode to the screen.
2. Touch [System Input] and [Change Fixed Zoom] in that order.
3. Select the specific zoom ratio to be changed.
4. Press the Clear key and change the setting value using the 10-Key Pad.
5. Touch [Set] to validate the setting value.
Functions • Displays the machine configuration.
Use • [Yes] or [No] indicates whether or not the option is installed.
Setting/
Procedure
1. Call the Tech. Rep. Mode to the screen.
2. Touch [System Input] and [Machine Configuration] in that order.
Functions
• Enter the serial number and other data.
Use
Setting/
Procedure
1. Call the Tech. Rep. Mode to the screen.
2. Touch [System Input] and [Technical Memo] in that order.
3. Enter the Password from the 10-Key Pad or the keyboard on the screen and touch
[Enter].
Functions • To set whether or not the HDD is mounted.
Use
• Select [Yes] if the HDD is mounted.
• [Yes] is automatically set when Hard Disk Format is executed.
Setting/
Procedure
• The default setting is “No”.
Ye s “ N o ”
To Next Page
Loading...
