11. Tech. Rep. Mode Field Service Ver. 1.0 Aug. 2005
174
bizhub 200/250/350
Adjustment / Setting
E. Finisher
Symbol Panel Display Part/Signal Name
Operation Characteris-
tics/ Panel Display
10
PC5-FN
Finisher
Paper Passage
(Middle)
Transport Sensor
Paper
present
Paper not
present
PC4-FN
Paper Passage
(Feed in)
Entrance Sensor
Paper
present
Paper not
present
PC3-FN
Elevate Tray
Upper/Lowered
Elevator Tray Home Position Sensor
At upper
limit
Not at
upper limit
S2-FN Shutter Status Shutter Detection Switch Close Open
S1-FN Front Door Set Front Cover Detection Switch Close Open
PC2-PK Punch Pulse Punch Motor Pulse Sensor Blocked Unblocked
PC14-FN Lower (Elev.) Elevator Tray Lower Limit Sensor Blocked Unblocked
PC15-FN Surface (Elev.) Top Face Detection Sensor Blocked Unblocked
Optional Tray
(Elevate)
Set Not set
PC3-FN
Elevate Tray
position
Elevator Tray Home Position Sensor Blocked Unblocked
PC6-FN Align Home 1 Alignment Home Position Sensor 1 At home
Out of
home
PC7-FN Align Home 2 Alignment Home Position Sensor 2 At home
Out of
home
PC16-FN Home (Shutter) Shutter Home Position Sensor At home
Out of
home
PC11-FN Paddle home (Exit) Exit Paddle Home Position Sensor At home
Out of
home
PC12-FN Exit R Home Exit Roller Home Position Sensor At home
Out of
home
PC8-FN Empty (Finisher) Storage Tray Detecting Sensor
Paper
present
Paper not
present
PC10-FN Staple Home (CD) Staple Home Position Sensor Blocked Unblocked
Self Priming Self-Priming Sensor Blocked Unblocked
Staple Empty Staple Empty Detection Sensor Blocked Unblocked
Staple Home Staple Home Position Sensor Blocked Unblocked
PC3-PK Punch Pos. 1 Punch Positioning Sensor 1 Unblocked Blocked
PC4-PK Punch Pos. 2 Punch Positioning Sensor 2 Unblocked Blocked
To Next Page
Loading...
