11. Tech. Rep. Mode Field Service Ver. 1.0 Aug. 2005
194
bizhub 200/250/350
Adjustment / Setting
1080
Data length error
(LEN value of TEXT data does not coincide with
actual data length.)
1081
Frame number error
(Last frame not received) (Some digits of frame
number missing)
• Check the host side for
machine registration status.
1082
Subject Type error
(Code with Subject Type undefined has been
received.)
1084
Validity period exceeded
(Validity period of data rewrite command is
exceeded.)
• Have the host send another
rewrite request mail.
1091
Command size over
(Attached file that exceeds the size of the recep-
tion buffer the copier is equipped with has been
received.)
1092
Faulty mail has been received when the machine
is yet to be registered.
• Check the host side for
machine registration status.
2039
Socket is not connected
(LAN cable on the server side is loose.)
• Check the SMTP server and
POP3 server on the user side.
203C Connection timeout
203E
Network is down
(LAN cable on the copier side is loose.)
• Check the network connector
for connection to the copier on
the user side.
• Check the network environ-
ment on the user side.
3000 POP3_AUTHORIZATION_ERR
• Check the POP3 server envi-
ronment on the user side.
3001 POP3_TRANSACTION_ERR
• Check the POP3 server envi-
ronment on the user side.
3002 POP3_CONNECT_ERR
• Check the POP3 server envi-
ronment on the user side.
3003 POP3_TIMEOUT_ERR
• Check the POP3 server envi-
ronment on the user side.
3004 POP3_FORMAT_ERR
• Check the POP3 server envi-
ronment on the user side.
3005 POP3_MEMORY_ERR
• Check the POP3 server envi-
ronment on the user side.
3006 POP3_JOBID_ERR
• Check the POP3 server envi-
ronment on the user side.
3007 POP3_NO_DATA_ERR
• Check the POP3 server envi-
ronment on the user side.
3008 POP3_DELETE_FAIL_ERR
• Check the POP3 server envi-
ronment on the user side.
3009 POP3_MAILBOX_FULL
• Check the POP3 server envi-
ronment on the user side.
4103
Not ready (MIO)
(An attempt is made to send or receive mail when
e-mail reception is not ready yet after power has
been turned ON.)
• Wait for some while and then
retry.
Error code Error Solution
To Next Page
Loading...
