5. Adding, Patching and Managing Fixtures 139
Colour Calibration
When the "show details" button is enabled at the top of the fixture window a column labeled
Col Cal will appear and shows whether the fixture has colour calibration data in the fixture
library. You cannot edit this column, but it is useful to be able to check if the fixture is colour
calibrated when working with the Colour Picker; see Working with Colour.
Parked
When the "show details" button is enabled at the top of the Fixture window a column labeled
Parkedwill appear and shows whether the fixture has any of its parameters parked in output.
You cannot edit this column, but it is useful to be able to check if the fixture is parked.
To Next Page
Loading...
