320 Hog 4 Operations Manual
17.5.2 Cuelist Wrapping
Wrapping decides what happens to a cuelist when it reaches the final cue. Configure the
wrapping in the Action at En d of List menu:
Wrap to beginning of list: Pressing Go after the final cue is reached sends the cuelist
to its first cue.
Add release end cue: Pressing Go after the final cue is reached releases the list and
sends it to its first cue.
Auto-release at end: The cuelist is released as soon as the last cue in the cuelist has
completed all its fade and delay times.
Don't allow wrapping: The cuelist stays on the final cue until released or sent
backwards.
17.5.3 Cue Only
Cue Only enables a cuelist to playback cue data one cue at a time (otherwise known as a
non-tracking cuelist). For example: any cue data in cue 1 is released as you play cue 2 so
that only data from cue 2 is onstage. The release time of the previous cue is determined by
the longest fade time in the cue being played.
17.5.4 Action of go when Looping
When the cuelist is performing a continuous loop with the use of a link cue, you can configure
the effect of pressing the Go key using the Action of Go Whe n Looping menu:
Action Notes
Exit loop
immediately
Jumps the cuelist to the link cue at the end of the loop. Use a wait time on
the cue after the link if you want to go to that cue automatically when exiting
the loop.
Exit loop at
end
Allows the loop to proceed to the last cue before jumping to the link cue at
the end of the loop. Use a wait time on the cue after the link if you want to go
to that cue automatically when exiting the loop.
Restart Jumps immediately to the first cue in the loop.
Stop at next Stops at the next cue in the loop.
Go Next Advances the cuelist forward by a single cue when go is pressed.
For more information on loops, see Loops and Links.
To Next Page
Loading...
