2. Hog OS Fundamentals 31
Selecting colours using Hue and Saturation or the colour picker will produce the same
visual colour output on all calibrated fixture types.
You can use fanning and effects on Hue and Saturation to produce attractive looks
quickly.
When you use Hue and Saturation to pick a colour, Hog 4 OS will automatically use the
best possible DMX value settings for each fixture type to achieve maximum light output
from each fixture.
You can cross-fade from a saturated red to a saturated green without the saturation
changing. The cross-fade will work through all the saturated colours between red and
green, rather than taking an unexpected path to get there, as can happen when using
CMY programming.
Cross-fades between colours recorded using Hue and Saturation will remain matched
on all fixtures through the progress of the cross-fade. This produces a better, more
even-looking colour cross-fade.
Tip: It is strongly recommended that you do not change between the HSI and CMY systems
within a show.
To Next Page
Loading...
