21. MIDI 395
21.4.5 Simulating MIDI Timecode
You can temporarily simulate MIDI timecode on the console using the Timecode Toolbar.
To simulate MIDI timecode:
1. Press the simulate button on the Timecode Toolbar. Simulate is now enabled and all
external timecode input for that source will be ignored.
2. Press the play button next to the simulate button to simulate timecode from the current
clock value as displayed for that timecode toolbar.
TIP: Using the jump toolbar you can jump the simulated timecode value to six different
jump points. To change the jump points click on the word "TIMECODE" on the far left hand
side of the timecode toolbar. A drop down menu will appear with a set of fields allowing you
to change the simulated jump points.
To Next Page
Loading...
