27. Fixture Library 437
To add a new DMX channel block click on the Blue Plus symbol located in the Add
Cha nn el box.
To remove a DMX channel block click on the upper most Red X button located in the DMX
channel box.
To move a DMX channel block up or down, click and drag the DMX channel block.
To add/remove DMX entry use the Blue Plus and Red X buttons within each DMX channel
block.
When adding new DMX channel blocks to a fixture, the console will display a menu of
template items that can be used as a starting point for defining each DMX channel block. In
some cases a template may describe multiple DMX channel blocks depending the fixture
attribute. For example, 16-bit intensity is a 2 channel function that occupies two DMX
channel blocks.
To Next Page
Loading...
