464 Hog 4 Operations Manual
Installation of the Hog Connectivity Driver on the visualizer computer is required.
On the console select the "Hog Connectivity" protocol and "Capture" manufacturer in
the visualizer node settings
In Capture set the project console link and universe bindings to "Auto" or "Hog 3/4"
when available.
Capture 2019 and newer:
Hog Connectivity and CITP protocols are both supported.
Installation of the Hog Connectivity driver is not required if the CITP protocol is used.
The CITP visualizer streaming protocol is compatible with Hog 4 OS consoles and both
the Windows and Macinstosh versions of Capture as well as Presentation files
generated by Capture v2019 and greater.
In Capture set the project console link to "Auto" and also set the universe bindings to
"Auto".
To Next Page
Loading...
