CHAPTER 6 KEYPAD
6-20
Monitor Mode
6
(12) Command cumulative pulse (displayed digits: signed 10 digits)
The number of pulses supplied to the pulse input terminal
is displayed. The cumulative value increases upon forward
direction pulses, while it decreases upon reverse direction
pulses. With two signals at A/B phase pulse, each edge is
counted (multiple of four). The count increases upon
B-phase advance.
Press and hold the [] and [] keys simultaneously for at least one second to reset the
feedback cumulative pulses.
on12
SET
(1 sec. or over)
99
----
9999
----
Blinks three
times.
-99
9999
----
Blinks three times.
Blinks three times.
9999
-999
9999
-999
ESC
ESC
SHIFT
SHIFT
ESC
The figure and "-" symbol are displayed alternately.
With a negative data
The figure and "-" symbol are displayed alternately.
With a negative data
With a negative data
U
L
／
To Next Page
Loading...