CHAPTER 14 PC LOADER
14-42
Parameter Conversion Tool
14
Setting the conversion condition
[3] Model setting before conversion – Motor
When the parameter file with which the motor type information can be obtained is loaded, the
motor model before conversion is automatically set.
If the parameter file with which the motor type information is not clear is loaded, set the motor
model before conversion manually. In this case, select the motor model before conversion.
■ When the parameter file with which the motor type
information can be obtained is loaded.
(The motor model is automatically set and the data
cannot be changed.)
■ When the parameter file with which the motor type
information is not clear is loaded
(Select the motor model.)
[4] Gain system parameter conversion
Select whether to convert the gain system parameter.
When “Yes” is selected for gain system parameter conversion, the
gain system parameter is included in the conversion operation.
When “None” is selected, the gain system parameter is not converted.
To Next Page
Loading...