D
IRECTION FR091521, REVISION 1 VIVID S60N/VIVID S70N BASIC SERVICE MANUAL
Chapter 8 - Replacement Procedures 8-89
PRELIMINARY
4.) Release the cable tie and the earth securing connector located at the rear of the system.
5.) Remove the DVD/CD-RW drive, Peripherals Console and the Fan for Cabinet Cage Assembly:
6.) Using a 3mm Allen key, release the four Cabinet Cage securing screws located at the rear of the
system. Then release the screw in the front - see Figure 8-113.
7.) Remove the Cabinet Cage Module from the system.
• DVD/CD-RW Drive Removal Procedure on page 8 - 185
• Peripherals Console Removal Procedure on page 8 - 164
• Fan for Cabinet Cage Assembly Removal Procedure on page 8 - 136
Figure 8-113 Release Cabinet Cage Securing Screws
To Next Page
Loading...
