Kayenne/Karrera/GV Korona
User Manual
129
Clear the currently selected register:
1 Select the Clear Current Reg button, bottom left of the keypad (lower right of menu).
Clear a different register:
1 Select the
Clear button (left side of menu).
2 Using the keypad, enter the register number to be cleared and select Enter.
Running an E-MEM Effect with Auto Run
Run an E-MEM with Auto Run off:
1 Recall the desired effect.
2 Press Run.
Run an E-MEM with Auto Run on:
1 Recall the desired effect—the effect will run as soon as it is recalled.
Learning E-MEM Sequences
Learn a Sequence of E-MEM Registers
1 Press LRN/Lrn, SEQ/Seq.
2 Press the
Page, Bank, and Register number keypad buttons in the order you wish them
to run. Delay time can be added at each register by pressing
Trans Rate and entering a
time value.
3 Press
LRN/Lrn.
Play a Sequence of E-MEM Registers:
1 Press SEQ/Seq.
Press the
Page, Bank, and Register number keypad buttons of the starting register.
Break a Sequence:
Press LRN/Lrn, SEQ/Seq.
Press the
Page, Bank, and Register number keypad buttons of the ending register to end
the sequence.
Press the same register button a second time.