Switcher Control
Macro Playback
140
“Disabled” is the Default for the Macro Attachable Control Panel Preference
The ability to attach macros from the Control Panel (in addition to the menu) is provided by
the Macro Attachable panel preference. Starting with version 9.1 of the GV switcher
software, the default state for Macro Attachable is ‘disabled’ (enabled in earlier versions).
The Macro Attachable panel preference is controlled using the Macro Attachable button in
the User Setups, Panel Prefs, Panel User Interactions menu.
Note: Macro Attachable is a Panel Preference and does not affect or limit
macro functionality including macro attachment from the GV switcher
Macros menu.
Macro Attachments and Importing Show Files
Shows created using versions earlier than 9.1 with Macro Attachable enabled will have the
Macro Attachable panel preference disabled (the 9.1 or newer default) when imported. The
show can be updated to the previous state by enabling the Macro Attachable button and
saving the show.
Kayenne Macro Operations
The Macro Control Button group on the System Bar has six buttons. These controls are
located above the PGM PST stripe, at the far right of the System Bar.
Kayenne Control Panel Macro Buttons
Macro Control Group
On System Bar
(One Per Source
Select Module)
To Next Page
Loading...
