Advanced Operations
Enable Image ReStore
376
1 Select a tab to execute a file operation “from” (left side of menu).
2 Select a tab to execute a file operation “to” (right side of menu).
3 Select an active Image Operations button; Copy, Swap, Move (or Delete) from the
center of the menu.
4 Select the Images range data pad in the center of the menu to display the pop-up
keypad.
5 Enter an Image ID number or a range of images:
a Enter a start ID.
b Select the Thru- button.
c Enter an ending range.
Note: Alternatively, use the Next, button in the pop-up keypad to enter
non-sequential Image IDs.
6 Select Enter.
7 Optionally, a starting ID can be defined for the image files in the target (To) directory
when the operation is executed:
a Turn on the Start ID button. b
Select the Start ID data pad.
c Enter an image ID in the pop-
up keypad, and select Enter.
8 Select Execute.
Backup & Restore
To Next Page
Loading...
