Advanced Operations
Create an Image Store Still with another Video (Not Key)
354
2 Turn off the Input B is Key button.
The
IS Input B is now a second video.
3 Select the IS Input B button to select it, then select a source from either the Logical or
Fixed sources scrolling list to change the video signal source.
Still Playback from the Menu
Still playback is performed in the Image Store, Images, Stills menu tab. Stills are loaded
directly to Program or they can be modified without being loaded.
Load stills to an Image Store channel output in one of the following ways:
• With the
Auto Load button turned on, select a channel to select it then select a still in
the scrolling list to load the still or turn the
Scroll Image List soft knob to load stills
sequentially.
• For direct keypad entry, type <Image ID #> +
dot (.) + <Channel #> in the Image ID
keypad and select Enter to load the image ID.
Example: typing 123.3 then selecting Enter loads Image ID 123 on output channel 3.
To Next Page
Loading...
