GRASS VALLEY KAYENNE - Adjust a 2 D DPM Image with Edge Pinning Pan and Scan

Advanced Operations
Create an Edge Pinning Effect (Example)
334
8 Enable the Edge data pad in the Edge Adjust/Crop Adjust pane (lower right; highlights
blue).
9 Use the
Edge All, Top, Right, Left, and Bottom soft knobs to pin the edges to the box;
this allows very precise edge adjustment. Repeat for each edge.
Adjusting the 2D DPM Edge Pinning
Edge All acts similar to a zoom.
10 Turn off the View Thru Enable if enabled.
11 Use the Pan and Scan features to reposition the shot clock if the camera is moved.
Adjust a 2D DPM Image with Edge Pinning Pan and Scan
To ‘Pan’ a cropped image means to move the crop sideways which simultaneously trims the
value of the Left Crop and Right Crop. To ‘Scan’ a cropped image means to move the crop
up and down, which simultaneously trims the Top Crop and Bottom Crop values.
1 Select the
Crop Edge data pad.
2 Select the
Pan or Scan button.
3 Use the
Crop Edge Pan or Crop Edge Scan soft knob to pan or scan until the image is
correctly displayed.
Note: Panning or scanning beyond (+ 16:9 for example) can have
unexpected results, i.e. the picture may begin to stretch.