Kayenne/Karrera/GV Korona
User Manual
333
effect without moving the box. This effect is very useful if the camera is bumped or moved
so the switcher operator can reposition the video from the switcher.
1 Select a background source.
2 Select
DPM, Transform, 2DPM in the menu and select a keyer with the source for the
box; in this case a camera pointed at a shot clock, and cut on the key over the
background.
3 Enable the Crop On button (highlights green).
4 Enable the Crop Edge data pad (turns light blue), the Crop Edge soft knobs will be
displayed.
5 Adjust the crop edges using the soft knobs to define the portion of the video you want
in the box (key); the shot clock in this example.
6 Enable the Post xform data pad and use the soft knobs to size and position the key
close to the desired area of the background using the soft knobs.
7 Select
DPM, Pinning, 2DPM and enable the Edge Pinning On button (highlights green).
Enabling Edge Pinning will pin the video edges to the cropped edges of the box.
a Optionally, enable the
View Thru Enable button to see the location of the box
effect over the background video; this sets the opacity of the video in the key to 50%. The
opacity can be adjusted by enabling the
View Thru Opac data pad and turning the View
Thru Opacity
soft knob.
To Next Page
Loading...
