GRASS VALLEY KAYENNE - Panel Memory and P-MEM Registers; Learn a Kayenne P-MEM Register

Switcher Control
Delegate a Switcher Mode to a Source Select Button Row
164
Delegate a Karrera Source Select Button Row to Aux Mode
1 Press the Aux button (high tallies blue).
2 Press an Aux output button; A/1 to A/19?.
3 Press a Source Select button with the desired source mapped.
Delegate a GV Korona Source Select Button Row to Aux Mode
1 Press and hold the Aux button (high tallies blue).
2 Press an Aux output button; A/1 to A/19?.
3 Press a Source Select button with the desired source mapped.
Panel Memory and P-MEM Registers
P-MEMs (Panel Memory Registers) store operational states or levels (also sub-levels for
Kayenne) for Control Surface Stripes. You could for example, quickly change Source Select
button row delegation (Source Select Button Row Mode Delegation, on page 157) from Aux
outputs to Macro registers with a P-MEM recall.
There are 99 P-MEM registers available, numbered from 1 to 99.
Note: P-MEM register 0 (zero) is not writable.
• P-MEMs learn Source Select button row mode delegations for:
• E-MEM registers,
• Macro registers,
• Shift levels, and
Additionally for Kayenne,
• Aux outputs and
• Router sources.
Note: Individual button selections are not saved in P-MEM registers, the
first Source Select button in the row will be switched on when recalled.
Other states are learned including:
• Macro offsets and
• Stripe to M/E delegation.
Learn a Kayenne P-MEM Register
See Switching Basics, on page 173 for more information about Local E-MEM register
operations.
1 In the Local E-MEM Module of the Control Panel, press the
Panel Mem button.
2 To enable/disable a stripe, press to toggle the Stripe buttons (STR 1-4 and Aux)
positioned vertically on the right side of the Local E-MEM keypad.
3 Press
LRN.