GRASS VALLEY KAYENNE - Learning of E-MEM Registers; Interaction with Macros; Use of Effects Dissolve and Sequence

Switcher Control
Clearing E-MEM Registers
134
Learning of E-MEM registers
A full set of levels and sub-levels are achieved by the following steps:
1. Press and release the LRN button which will be either WHITE to indicate there are not included
definable sublevels or missing sub-levels or CYAN to show that such sublevels are present/missing
2. Press up to 3 digits to specify the target register
3. Press ENTer
4. The register will be learned and the E-MEM area will show it as recalled
5. The LRN button will be white
A set of less-than-all sublevels or an effect using definable sublevels will be achieved by the following steps:
1. Press and hold the LRN button which will be CYAN in color as the user will have included some
definable sublevels or removed others
2. Press up to 3 digits to specify the target register
3. Press ENTer
4. The register will be learned and the E-MEM area will show it as recalled
Interaction with macros
Whichever method the user chooses to recall an E-MEM register the effect inside the Frame will be able to be
recorded correctly and a playback of a macro recalling an E-MEM will not be affected. [
Use of Effects Dissolve and Sequence
Effects dissolve will work just as it does now with the register to be dissolved to either being preprogrammed
as it was recorded or commanded prior to its specification.