Switcher Control
Change Background Buses with Panel Mems
168
Create a Source Rules Pattern
1 Select the ME delegation buttons you wish to apply source rules to in the left-most
menu pane.
Note: Multiple M/E selection is supported and a Select All M/Es button is
provided at the bottom of the M/E selection menu pane.
2 Select the source buttons in the scrolling source list menu pane (multiple selection is
supported), right of the ME delegation buttons, you wish to setup as a Source Rules
Pattern.
3 Select the
On, Off, or As Is Source Rules state buttons in the Source Rules Setup menu
pane for each Keyer you wish to set the state.
Store a Source Rules Pattern
1 Select one of the Store 1-6 buttons to store the Source Rules Pattern.
2 To name the stored pattern, select the center
Patt 1-6 button to which you want to
store the pattern in the Source Rules Patterns menu pane, and a keyboard will be
displayed. Type the name and press
Enter.
Source Buttons
with Status
To Next Page
Loading...
