Kayenne/Karrera/GV Korona
User Manual
179
Note: 15 button widths are only available with 1-M/E Control Panels.
• KAYN-PNL-BAR-35 and KAYN-PNL-BAR-25 System Bar, available in two sizes to match
various Control Panel widths.
• KAYN-PNL-DCM - Device Control Module, available as an option for 3 and 4-M/E panels
and as a satellite panel module.
The Kayenne Control Panel is shipped in a default configuration, however module
configuration can be customized. For more information about module configuration
options, refer to the Kayenne/Karrera/GV Korona Installation & Service Manual.
4-
M/E Control Panel and Modules
Other Control Panel configurations are available for the Kayenne system, including 1-M/E,
2M/E, and 3-M/E.
Setting Panel Saver Mode
The Kayenne Control Panel will go into Panel Saver or “Sleep” mode, if no Control Panel
buttons are pressed. The Control Panel goes into Panel Saver mode after 10 minutes of
inactivity.
The Panel Saver mode for the Control Panel can be set to 10, 20, 30, or 60 Minutes (default is
10 minutes).
1 In the Multi-Function Module, from Home, press
Panl, Bri.
2 Turn the bottom soft knob labeled
Panel Saver Delay, Minutes to adjust the Panel
Saver length.