GRASS VALLEY KAYENNE - Trim a Movie; Split an Image Store Movie; Join Image Store Movies and Stills

Kayenne/Karrera/GV Korona
User Manual
365
Trim a Movie
The Cut Edit, Trim mode allows you to trim unwanted video from the start and/or end of a
movie. Doing so deletes that video, conserves space in the cache, and ensures that
unwanted material will not be aired.
1 In the Image Store, Images, Movie Edit menu, select the Image Store, Images, Movie
Edit menu.
2 Select an Image Store channel with the movie to be trimmed.
3 Cue the movie to the first desired frame.
4 Select
Mark In to set that in point. The timecode of that location will be displayed.
5 Cue the movie to the last desired frame.
6 Select
Mark Out to set that out point.
7 You can use the
GoTo In and GoTo Out buttons to cue the movie, and play it to ensure
those points are correct.
8 When satisfied, select
Trim Movie. A prompt will appear indicating the operation is not
reversible. Select Yes. The extra video will be discarded.
Split an Image Store Movie
The Cut Edit, Split Movie mode allows the operator to cut a movie in Image Store Cache into
two new movies; the original movie is not retained in cache so the cache memory used
before and after the cut are the same.
1 In the Image Store, Images, Movie Edit menu, select the
Cut Edit Type button.
2 Insert the movie split point by:
a Either jogging, shuttling, or playing to the point in the movie where you want to
split the movie and selecting the
Mark Split button, or
b Selecting the
Mark Split data pad (below Mark Split button) and entering the value
for the split point in the Mark Split Point pop-up keypad, and select Enter.
Note: Mark In and Mark Out are not used for Trim.
3 Select the Split Movie button. The New Image 1 pop-up keyboard is displayed.
4 Enter a name (select
Name) or accept the default (the existing ID) for the first movie and
select Enter.
5 Enter a name (select
Name) or accept the default for New Image 2 (the existing ID plus
and select
Enter. The two new movies are created and original removed.
Join Image Store Movies and Stills
The Join Edit mode allows the operator to merge two clips into one. The original clips are
no longer in cache so no additional cache is used. Movie and still images are joined to
create a new movie.
1 In the Image Store, Images, Movie Edit menu, select the Join Edit Type button.
2 Select the Change Image button for the first movie (top thumbnail) and select the
desired movie.