Kayenne/Karrera/GV Korona
User Manual
395
points, and create a sub-clip (see Make Sub-clips from the Current Clip, on page 396).
A currently recording clip can also be loaded into another channel of ClipStore. From the
other channel, sub-clips can be made from any part of the recording without interrupting
the record.
Build Editing
Build Editing allows you to take elements from one long clip or from multiple clips and
make a sub-clip, including:
• Video and Audio (audio from a clip or .WAV file),
• Video (with embedded audio) and Key, or
• Video, Audio (audio from a clip or .WAV file), and Key.
CAUTION: Audio files must be 48kHz/.WAV file format, other file types will
not be recognized by ClipStore.
The clip created with the Make Clip operation will be a sub-clip that has its head to tail
length defined by the mark-in and mark-out points of the Video track (if there are no marks,
the sub-clip created will be the same length as the original). Both Audio and Key tracks of
the new clip will only exist between the Video track’s marks.
Video is the controlling track in the scratch clip, i.e. the Audio, Key, and motion control is
slave to the Video track when selected.
Audio Offset, Key Offset, and Jog soft knobs are provided for editing (1/4 turn equals
1 frame).
To Next Page
Loading...
