Kayenne/Karrera/GV Korona
User Manual
381
Set Network and Sharing Settings
Click to select the following in order:
1 Windows
Start, Control Panel,
2 Network and Sharing Center,
3
Choose homegroup and sharing options,
4 Change advanced sharing settings...,
5 Turn off network discovery (radio button),
6 Turn off password protected sharing (radio button), and
7
Save Changes.
ClipStore
With the seamless integration of the K2 Summit/Solo technology into the Image Store
menus, you can record and play clips with audio. The Summit provides four Video/Key
channels while the Solo provides two.
See the Kayenne/Karrera/GV Korona Installation & Service Manual for engineering
configuration information.
• The ClipStore is supplied to record and playback with AVC-Intra 100 or DVCPRO HD
compression format. Clips imported in DVCPRO HD, DVCPRO 25/50, DV, and MPEG-2
will play natively.
• The ClipStore supports embedded audio only. The AES inputs and outputs are not
used.
The ClipStore is completely configured and controlled from the GV Switcher menu and
control panel. There is no need to use the built-in AppCenter Elite software. In fact, if
changes are made to the ClipStore using AppCenter, they will be overwritten by the
switcher the next time it sends a configuration to the ClipStore.
Note: To change the Summit IP address, see the Installation & Service
Manual for your switcher model.
This highly integrated solution provides several powerful features, including:
• F
ast access to clips and folders,
• Large storage capacity,
• Non-volatile memory—no loss of images due to power failure,
• Clip control from the GV Switcher Menu Panel and clip stack control from the GV
Switcher Control Panel,
• ClipStore device controls (including macros and cues) are E-MEMable, and
• Make sub-clips from clips and build composite clips with audio.
Summit/Solo Software Version
The latest version of the AppCenter Elite software is available on the GV Switcher Software
Download site.
To Next Page
Loading...
