GRASS VALLEY KAYENNE - Camera Operations; Ethernet Camera Tally Operations

Kayenne/Karrera/GV Korona
User Manual
263
Note: The Camera sub-level is assigned to an E-MEM level in the Menu
Panel.
Ethernet Camera Tally allows you to:
• Tally camera associated sources using Tally Calcs and,
• Tally the Red, Yellow, or Green indicator on the camera from the switcher Menu
Panel/Control Panel.
Camera Operations
Camera control from the GV Switcher switcher provides remote control of a subset of
camera functions. Camera user operations from the menu are performed in the Source Ops,
Cameras, Live Ops menu tab.
GV Switcher camera control provides the ability to place cameras into a usable but not fully
shaded setup/rehearsal mode using the menu buttons in the Live Ops menu tab:
• Camera Sources—Select from 1-99 defined camera sources for control.
• Color Bars—Enable/disable color bars to verify the camera as the associated source.
• Auto Iris—Enable/disable camera’s Auto Iris.
• Auto Black—Triggers a reset of camera’s black level.
• ND (Neutral Density) Filter— Changes the neutral density filter wheel setting.
Use back and forward arrow buttons to scroll through and enable 1/4, 1/16, 1/64 filter
wheel settings, or CLR to clear the filter wheel setting.
Ethernet Camera Tally Operations